(1.800.449.5919) CONTACT US

Product was successfully added to your shopping cart.
Previous

PA1000 V2

TX5 V2

Quick Overview

5W FM Transmitter
See price before order confirmation. What's this?

Availability: Call for Availability

Details

Radio ‘Pick Hit’ winning V2 FM Transmitters are packed with features to improve sound quality & reliability.

The TX5 V2 has integrated multi-band DSPX audio processing that means stations without a dedicated processor sound great, right out of the box. It also has one of the industry’s cleanest exciters and an ultra-low distortion modulator which go to make it a highly stable FM transmission system. Clean, loud, market leading audio performance that will crush the competition.

We’ve made our transmitters the most intelligent on the market by adding Ethernet Remote Control (click for online demo), Email Alerts, Silence Detection, Advanced Alarms as well as an In-built Logger. All of these features make it easy for you to monitor the status of your transmitter. It will email you if it has a problem and keep a log of any issues to be investigated. You can also adjust settings remotely if required. All these features are designed to give you peace of mind and save you time.

Configurable Status and Alarm Ports, to signal to, and control external equipment. This will alert you to issues and offer solutions to keep you on air. For example, it can be configured to switch on back-up audio or back-up transmitters should it detect a problem.

Analogue, Digital and Composite Inputs give maximum flexibility to interface with any existing and future audio chains, alleviating compatibility problems and future proofing your equipment.

FSK ID Keyer as standard for translators removes the need for external hardware or hourly audible announcements and offers broadcasters a one-box solution for their translator sites.

Flexible and extensive Web Mail, SNMP, Telnet and Serial Remote Control that will keep you aware and in control of your station’s transmission, and allow you to interact with your transmitter using the method that you prefer.

  • 0.05 - 5 watts RF output power
  • 4+ miles transmission range
  • XLR analogue/digital inputs
  • Composite input
  • Stereo encoder
  • Pre-emphasis audio limiter
  • DSPX multi-band processor inside
  • Antenna fault protection
  • VSWR and temp monitoring
  • RS232 remote control
  • 2 year international warranty

 

RF

Harmonics

better than -75 dBc

Spurious

<-90dBc

Frequency range

87.5 - 108 MHz

Frequency steps

50 kHz

Frequency selection

User interface with display or web remote control

Frequency control type

Dual speed phase locked loop

Frequency stability

<+/- 500 Hz (fine adjustment available)

Modulation

Direct frequency modulation

Synchronous AM Noise

0.31% (at normal deviation)

Asynchronous AM Noise

0.18% (at centre frequency of 97.7 MHz)

 

AUDIO & MPX I/O

MPX input / output connector

BNC / BNC

MPX input / output impedance

1.8kOhm (in) / >600 Ohm (out)

MPX input level

-10dB to +10dB (adjustable)

MPX input / output response

+/- 0.02 dB, 5 Hz to 100 kHz

Audio input connectors

XLR balanced

Analog input impedance

10 kOhm

AES/EBU sampling rates

32kHz, 44.1kHz, 48kHz, 88.2kHz and 96kHz

 

STEREO

Subcarrier generation

Microprocessor generated 8x over-sampled

Pilot

19 kHz +/- 1 Hz (adjustable)

Pilot generation

Microprocessor generated 16x over-sampled

Output level

+6dBu (BNC)

15 kHz filtering

80dB at 19kHz (DSP based)

Overshoot filter clipping

DSP based

Spurious: >80 kHz / >160kHz

> -60dBr / > -80dBr

Stereo separation

>50dB (20Hz - 15kHz)

 

LIMITER

Audio input levels

-10dB to +24dB for level control, DSP auto levelling

Audio input connectors

XLR balanced (shielded)

Input CMRR

> 60dB

Audio distortion

0.05% at limiting 1 KHz (bypass preset)

Frequency response

20 Hz to 20 kHz +/- 0.2dB (pre-emphasis off)

Processing range

Processing control range 40dB (pre-emphasis off)

Input impedance

10 kOhm

Pre-emphasis

50 µs,75 µs and 0 µs (off)

Process modes

Multiple presets

 

OTHER

User Interface

3 buttons, rotary encoder & 256x64 graphics display

External control

I/O Alarms D9-type Male; RS232 D9-Type Female

Telnet and Web remote RJ45 Ethernet

 

PHYSICAL

Size

485mm x 350mm x 45mm

Weight

2kg

Voltage input

100 - 265 VAC

Power connector

IEC

Switched mode approvals

UL / TUV / CE

Power consumption

30W average @ 5W RF

Power

0.05W - 5.05W

Power supply type

Internal

Connector

N-type 50 Ohm

Approvals

CE/RTTE, FCC*

1 x TX5 V2 FM Transmitter