Trinnov Optimizer ST2

ST2-Pro

Trinnov

Stereo Loudspeaker Processor

The ST2-Pro is based on new hardware specifically designed for audio professionals. The silent 2U chassis features a rear panel with XLR connectors, and a special attention has been given to the AD/DA converters, designed by Trinnov to meet the requirements of the most demanding sound engineers. In fact, the whole chassis and electronics have been redesigned, both outside and inside: the new Trinnov audio interfaces, the “AES4″ and the “ADA4″, are connected to the new Trinnov Core, a high performance digital audio engine.


Click here to see a larger image


Trinnov’s unique software modules, the Processor, the Optimizer and the SmartMeter (optional) can run simultaneously on top of the ST2-Pro:

  • The Processor manages the core loudspeaker processing functionality, such as routing, delays, gains, crossovers and manual EQs (graphic and parametric).
  • The Optimizer module offers unique room EQ features with Multi-point Measurements, Target Curves and Automatic Phase Optimization.
  • The Smart Meter is a fully featured Multi-Meter (Loudness, Peak and Quasi-Peak) and Monitor Controller

The ST2-Pro can be controlled via a touch-screen, via a monitor + mouse, from any computer (PC or Mac) via a VNC client, through the network, or via the optional GPIO interface.

“With this major improvement to our flagship stereo processor, we remain committed to helping audio professionals improve the quality and consistency of their productions in terms of tonal balance and stereo image” says business development director Felipe Avila-Reyes. “And our new Loudness Meter option only adds more value to the ST2-Pro”.

 

Technical specifications in brief:

  • 4 balanced analog inputs via 4 XLR connectors
  • 4 balanced analog outputs via 4 XLR connectors
  • 4 digital inputs (2 AES3 inputs) via 2 XLR connectors
  • 4 digital outputs (2 AES3 outputs) via 2 XLR connectors
  • Word clock in & out via 2 BNC connectors
  • 4 processing channels
  • 64-bit floating point processing
  • User interface through VGA output and mouse, or from a VNC client (PC or Mac) through the network
  • GPIO option (SubD-25 connector) Volume knob option (USB)
  • Integrated power supply silent, low-speed fan
  • 2U 19″ rackmount
  • Dimensions (W x H x D) : 444 x 88,5 x 357 mm

 

Trinnov Optimizer: what’s new in V3.0

• Multipoint Measurements: measure multiple points in your room, using one or more microphones. The Optimizer Multi-Point algorithms take into account every point according to the weights you specify.

• New Graphs: compare multiple loudspeakers or measurement points on the same graphs. Analyze impulse responses, group delay, and the filters generated by the Optimizer.

• Modular Architecture: choose the features you need. The Optimizer Runtime allows you to use the Optimizer as a “black box”. The Optimizer Toolbox includes all the measurement and analysis functionnality to calibrate your loudspeakers.

 Call us for a price